Publications
Research output.
Peer-reviewed journal articles, conference presentations, and patents — full list on Google Scholar and ORCID.
20
Journal Articles
17
Conference Presentations
1
Preprint
1
Patent
Journal Articles
- J20A. Gokhale, B. Harun, C. Singh, T.P. Weihs, J. Jain, A.K. Das, A.D. Varma
Failure Investigation of Intrados and Neutral Axis Cracking in TP347H Reheater Bend Tubes of an 800 MW Power Plant
Journal of Failure Analysis and Prevention· 2026DOI - J19R. Berlia, C. Singh, Z. Qu, R. Mehta, T.P. Weihs
Revealing Bulk-like Properties in Freestanding PVD Copper Foils
Materials Science and Engineering: A· 2025DOI - J18A. Gokhale, S. Mangam, C. Singh, J. Jain, A.K. Das, A.D. Varma
Hydrogen Damage in Carbon Steel Tubing: An Investigation of Various Macro-Failure Morphologies Observed in Boiler Water Wall Tubes
Journal of Failure Analysis and Prevention· 2024DOI - J17N.T. Dung, C. Singh, T. Lee, K.H. Lee, D.H. Lee, S.Y. Lee
Hydrogen-Driven Ultra-Cryogenic Deformation and Embrittlement in Ti–6Al–4V Alloy at 15 K
Materials Science and Engineering: A· 2024DOI - J16C. Singh, T. Lee, K. Lee, Y.S. Kim, E. Huang, J. Jain, P.K. Liaw, S.Y. Lee
Exceptional Fatigue-Resistant Austenitic Stainless Steel for Cryogenic Applications
Applied Materials Today· 2024DOI - J15T. Lee, C. Singh, S.V. Sujith, Y.S. Kim, J.Y. Kang, S.Y. Lee
Rate-Dependent Serration Behavior of High-Mn Steel at Ultra-Low Temperatures
Journal of Materials Research and Technology· 2024DOI - J14K.R. Ramkumar, S. Vigneshwaran, C. Singh, R.E. Kim, P. Seenuvasaperumal, H.S. Kim
Effect of Cryo-Rolling on Strengthening–Softening Transition in Deformation Twinned Cupronickel (Cu–10Ni) Alloy
Metallurgical and Materials Transactions A· 2024DOI - J13T.D. Nguyen, C. Singh, Y.S. Kim, J.H. Han, D.H. Lee, K. Lee, S. Harjo, S.Y. Lee
Mechanical Properties of Base Metal and Heat-Affected Zone in Friction-Stir-Welded AA6061-T6 at Ultra-Low Temperature of 20 K
Journal of Materials Research and Technology· 2024DOI - J12T.D. Nguyen, C. Singh, D.H. Lee, Y.S. Kim, T. Lee, S.Y. Lee
Deciphering Hydrogen Embrittlement Mechanisms in Ti–6Al–4V Alloy: Role of Solute Hydrogen and Hydride Phase
Materials· 2024DOI - J11A. Hussain, S. Khan, S. Sharma, S. Sharma, C. Singh, A. Rastogi, P.K. Kulriya
Swift Au⁺⁹ Ion Irradiation-Induced Defects and Alloy Complexity Effect on the Mechanical Hardness of NiCoCrFePd HEA and NiCoCrFe MEA
Journal of Applied Physics· 2024DOI - J10C. Singh, S.S. Singh, J. Jain
Development of Sustainable Novel Mg–Ca–Sc Alloys with Exceptional Corrosion Resistance
Journal of Alloys and Compounds· 2023DOI - J9A. Gokhale, M. Subhakar, C. Singh, P. Halder, A.K. Das, J. Jain, A.D. Varma
Failure Investigation of Brazed Copper Winding Bar Strands of 250 MW Stator
Engineering Failure Analysis· 2023DOI - J8C. Singh, K. Hariharan, S.P. Phani, F.C. Chen, D.P. Tran, C. Chen, J. Jain
Influence of Additives-Induced Microstructural Parameters on Mechanical Behavior of (111)-Oriented Nanotwinned Microcrystalline Copper
Materials Science and Engineering: A· 2023DOI - J7A. Hussain, S.A. Khan, S.K. Sharma, K. Sudarshan, S.K. Sharma, C. Singh, P.K. Kulriya
Influence of Defect Dynamics on the Nanoindentation Hardness in NiCoCrFePd High-Entropy Alloy under High-Dose Xe⁺³ Irradiation
Materials Science and Engineering: A· 2023DOI - J6A. Kumar, B. Jayabalan, C. Singh, J. Jain, S. Mukherjee, K. Biswas, S.S. Singh
Role of Chromium Content on the Microstructure and Mechanical Properties of Lanthana-Based Ferritic ODS Steels
Metals and Materials International· 2022DOI - J5C. Singh, S.S. Singh, J. Jain
Elucidating the Role of Micro-Galvanic Coupling between Eutectic α-Mg Lamellas and α-Mg Matrix on the Hydrogen Evolution Behaviour of Mg–0.6Ca Binary Alloy
Philosophical Magazine Letters· 2022DOI - J4C. Singh, S.S. Singh, J. Jain
Elucidating the Role of Grain Boundary Sliding in Enhanced Ductility of High Strain Rate Sensitive Mg–Ca Binary Alloy: An In-Situ Study
Materials Science and Engineering: A· 2022DOI - J3A. Gokhale, A. Varma, C. Singh, J. Jain, R.K. Yadavalli
Failure Analysis of SS 304 HCu Reheater Tube of a Supercritical Power Plant
Engineering Failure Analysis· 2022DOI - J2A. Kumar, B. Jayabalan, C. Singh, J. Jain, S. Mukherjee, K. Biswas, S.S. Singh
Processing and Properties of Yttria and Lanthana Dispersed ODS Duplex Stainless Steels
Materials Science and Engineering: A· 2022DOI - J1C. Singh, L. Narayan, J. Jain
Influence of Simultaneous Alloying with Ca and Sc on the High-Temperature Deformation Mechanism, Texture, and Recrystallization Behavior of Mg–Ca–Sc Alloys
Materials Characterization· 2021DOI
Preprint
- P1C. Singh, A. Goglia, P. Mastracco, M. Flickinger, L.J. Kecskes, P. Clancy, T.P. Weihs
Synthesis and Characterization of Ultrasonically Atomized Al-Based Alloy Powders for Tunable Thermal Reactivity
arXiv preprint· 2025DOI
Conference Presentations
- C17C. Singh et al.
From Implants to Ignition: Magnesium Alloy Design Across Biomedical and Energetic Applications, Combustion Products, and LASEM Response
Magnesium Technology 2027, TMS Annual Meeting & Exhibition· 2027Invited Presentation
- C16C. Singh, W. Murphy, E. Wainwright, T.P. Weihs
Alloying Aluminum Powders for Tunable Reactivity: Binary and Ternary Alloy Microstructures, Combustion Products, and LASEM Response
Materials Science in Extreme Environment URA, ATR· 2026Best Presentation Award
- C15C. Singh, H.D. Almeida, T.P. Weihs
Integrating Alloying and Processing to Tailor Ignition and Combustion in Reactive Aluminum Alloy Powders
Gordon Research Conference· 2026 - C14C. Singh, H.D. Almeida, T.P. Weihs
Integrating Alloying and Processing to Tailor Ignition and Combustion in Reactive Aluminum Alloy Powders
Gordon Research Seminar· 2026 - C13C. Singh, A. Goglia, P. Mastracco, M. Flickinger, L.J. Kecskes, P. Clancy, T.P. Weihs
Synthesis and Characterization of Ultrasonically Atomized Al-Based Alloy Powders for Tunable Thermal Reactivity
TMS Annual Meeting & Exhibition· 2026Link - C12C. Singh, A. Goglia, M. Flickinger, L.J. Kecskes, T.P. Weihs
Designed to Ignite: Microstructural Tuning of Al-Alloy Powders
Materials Science in Extreme Environment URA Student Symposium, Pacific Northwest National Lab· 2025 - C11C. Singh, A. Goglia, B. McGrann, G.M. Gonzalez, M. Flickinger, L.J. Kecskes, T.P. Weihs
Synthesis and Characterization of Reactive Aluminum-Based Alloy Powders for Advanced Applications
Gordon Research Conference· 2025 - C10C. Singh, A. Goglia, B. McGrann, G.M. Gonzalez, M. Flickinger, L.J. Kecskes, T.P. Weihs
Synthesis and Characterization of Reactive Aluminum-Based Alloy Powders for Advanced Applications
Gordon Research Seminar· 2025 - C9C. Singh, M. Flickinger, L.J. Kecskes, T.P. Weihs
Reactive by Design: Alloying and Etching Strategies for Tunable Al Powders
Weapons of Mass Destruction, ATR· 2025Invited Presentation
- C8T. Lee, S.Y. Lee, C. Singh, Y.S. Kim, J.Y. Kang, J.H. Han, D.H. Lee
Rate-Dependent Serration Flow and Mechanical Properties of High Manganese Steel at 15 K
TMS Annual Meeting & Exhibition· 2025 - C7T.D. Nguyen, Y.S. Kim, C. Singh, S. Harjo, S.Y. Lee
In-Situ Neutron Diffraction Study of Ultra-Low Temperature Mechanical Properties of Base Metal and Heat-Affected Zone in Friction Stir Welded AA6061 Alloy
HANARO Symposium· 2024 - C6T.D. Nguyen, Y.S. Kim, C. Singh, S. Harjo, S.Y. Lee
Investigation of Mechanical Properties of Friction-Stir-Welded AA6061 Alloy at 20 K
Korean Institute of Metals and Materials, Fall Conference· 2024 - C5T.D. Nguyen, C. Singh, Y.S. Kim, S. Harjo, S.Y. Lee
Ultra-Low Temperature Mechanical Behavior of Base Metal and Heat-Affected Zone in Friction-Stir-Welded AA6061-T6
Spring Conference of the Korean Society for Heat Treatment· 2024 - C4T. Lee, C. Singh, D.H. Lee, J.Y. Kang, S.Y. Lee
Evaluation of 15 K Serration Behavior and Tensile Properties of High Manganese Steel Depending on Strain Rate
The Korea Institute of Metals and Materials· 2024 - C3C. Singh, Y.S. Kim, S.Y. Lee
Investigation of Tensile and Fatigue Properties of 316L Stainless Steel at 20 K
Pacific Rim International Conference on Advanced Materials and Processing (PRICM)· 2023 - C2C. Singh, J. Jain
Influence of Ca and Sc Addition on the Deformation Mechanism, Recrystallization, and Texture of Hot-Rolled Binary and Ternary Mg-Alloy
3rd Indian Materials Conclave (IndMac) and 32nd Annual General Meeting of MRSI· 2021 - C1C. Singh, J. Jain
Mg–Ca–Sc Alloys: Potential Orthopaedic Biodegradable Load-Bearing Implant Material
Prime Minister Research Fellowship (PMRF) Symposium· 2021
Patent
- Pat.J. Jain, N.N. Gosvami, A. Bhowmik, C. Singh, I. Agarwal
A Method for Electroplating an Alloy and Composition Thereof
Indian Patent Application 202411013979· 2024Developed in collaboration with GIVA (Indiejewel Fashions Pvt. Ltd.) during PhD at IIT Delhi.